===============          ===================         =======================
README.TXT File          ETABS Version 8.5.0         Release Date 2005-03-01
===============          ===================         =======================


PLEASE READ THIS FILE!

It contains important information that is more current than what is in
the Manuals.

==========================================================================
ETABS V8.5.0 is a minor update to V8.4.5 and is also available on the ftp.
==========================================================================

CONTENTS
--------
  1. Installation Instructions for ETABS Version 8.5.0 
  2. Specifying Program Level for Version 8.2.7 and up
  3. Updating older version 8.xx from the ftp
  4. Updating older version 7.xx or 6.xx
  5. Significant changes from Version 8.00


1. Installation Instructions for ETABS Version 8.5.0
----------------------------------------------------

  The installation instructions are available in three places.  
     A.  The "ETABS Installation Card" link on the ETABS CD browser.
     B.  A printed document included with the program package.
     C.  In the ETABS_Install_Instructions.pdf file in the root directory of the CD.
  The instructions include information about the software protection system used and 
  installation options and instructions. You can choose between a Standalone or 
  Network installation.

  For new Network installations, see the License Manager System Administrator's
  Guide for more detailed information about the License Manager and the License 
  Manager Administration program "WlmAdmin.exe".

  This installation contains the License Manager program SentinelLM 7.2.0.23. 
  If you are currently running an earlier version of SentinelLM then it should be
  uninstalled prior to installing this version. IMPORTANT!! Note that
  all commuter licenses should be checked in before uninstalling the old version.
  
  If you experience problems with the license please refer to the appropriate 
  "License Trouble Shooting Guide..." located in the ETABS folder.
  

2.  Specifying Program Level for Version 8.2.7 and up
-----------------------------------------------------

  If you have both ETABS Plus and ETABS Nonlinear programs running on a network you
  might need to specify which one you want to run.  There is a "ProgramLevel" entry 
  in the ETABS.ini file which you can set.  The ETABS.ini file is located in the 
  workstation's Window directory.
 
   
3. Updating older version 8.xx from the ftp
-------------------------------------------
  The V8.5.0 update from the ftp is a full installation. Installaing this will 
  uninstall older versions 8.xx.

 
4. Updating older version 7.xx or 6.xx
--------------------------------------
  Version 8.xx can coexist with any version 7.xx and/or 6.xx.  


5. Significant changes from Version 8.00
----------------------------------------

  Changes from V8.4.9/2 to V8.5.0 (03/01/2005)
  -----------------------------------------
    - Reissued on CD.
    - SentinelLM Version changed.
    - Detailed composite design output enhanced.


  Changes from V8.4.8/2 to V8.4.9/2 (01/26/2005)
  -----------------------------------------
    - Combos can now be exported to SAFE.
    - Minor enhancement to design error reporting.
    - Minor bug fixes.

  Changes from V8.4.8/1 to V8.4.8/2 (12/10/2004)
  -----------------------------------------
    - Minor display enhancement to Concrete design results.

  Changes from V8.4.7/1 to V8.4.8/1 (10/21/2004)
  -----------------------------------------
    - Minor user requested improvements and bug fixes related to design.

  Changes from V8.4.7 to V8.4.7/1 (08/26/2004)
  -----------------------------------------
    - Minor bug fix. Only affected V8.4.7 when floor loads from null areas were
      being transferred to structural areas. Program was giving warnings.

  Changes from V8.4.6 to V8.4.7 (08/24/2004)
  -----------------------------------------
    - Hinge plastic rotation results are now available through
      database.
    - Australian/New Zealand Steel shape database added
      compliments of our New Zealand dealer.
    - Minor bug fixes.

  Changes from V8.4.5/1 to V8.4.6 (06/21/2004)
  -----------------------------------------
    - An error was fixed in steel axial hinge ductility
      calculations. The error affected hinges that were
      partially defined. Fully defaulted or fully specified
      hinges were unaffected.

  Changes from V8.4.5 to V8.4.5/1 (06/09/2004)
  -----------------------------------------
    - Minor change to treatment of mass at Panel zones.
      Should help convergence in nonlinear problems.
    - Other minor changes to composite beam design.
      Some overconservatism removed.
    - Trap added in Section Designer for Torsional 
      constant calculation to avoid numerical 
      sensitivity problems.

  Changes from V8.4.4 to V8.4.5 (04/30/2004)
  -----------------------------------------
    - Reissued on CD.
    - SidePlate connection parameters changed slightly.

  Changes from V8.4.3 to V8.4.4 (04/25/2004)
  -----------------------------------------
    - Minor bug fixes to shearwall design.
    - Minor bug fixes to steel design using Chinese building codes. 
    - Other minor bug fixes.

  Changes from V8.4.2/1 to V8.4.3 (03/17/2004)
  -----------------------------------------
    - A bug that got introduced in V8.4.1 and V8.4.2 which caused the
      frame self weight to be incorrect if Frame Property Modifiers
      were used as an assignment to Frame elements has been corrected.
      Models run on V8.4.1 and V8.4.2 that use this feature should be
      rerun. 
    - Other minor bug fixes related to Chinese Design Codes.

  Changes from V8.4.2 to V8.4.2/1 (03/04/2004)
  -----------------------------------------
    - Section Designer updated. Should be faster for some sections.
    - Bug fixed which for some Pier Designs would freeze program.
    - Other minor bug fixes.

  Changes from V8.3.8 to V8.4.2 (02/05/2004)
  -----------------------------------------
    - Reissued on CD.
    - Support for other languages has been added.
    - The Chinese Building code implementation has been updated. 
    - Support for Frameworks Plus V7.1/7.2 has been added.
    - Section Designer has been updated.
    - Other minor bug fixes.

  Changes from V8.3.7 to V8.3.8 (10/21/2003)
  ------------------------------------------
    - This is the first release of ETABS with the Chinese Building Codes.
      The activation of these codes requires special licenses. These
      licenses are only available when purchased through the Chinese Dealer. 
    - Other minor bug fixes.

  Changes from V8.3.5 to V8.3.7/2 (10/24/2003)
  --------------------------------------------
    - Beam partial fixity springs are now accounted for in K-factor
      calculations.
    - Other minor bug fixes.

  Changes from V8.3.0 to V8.3.5 (09/04/2003)
  -----------------------------------------
    - Additional eccentricities (accidental torsion) can now be specified
      for Response Spectrum cases. The program will automatically add a static
      load case with the additional moments caused by the diaphragm dynamic
      loads and the specified eccentricity. The results for the Response
      Spectrum case will automatically include the response from this added
      static load case.
    - Design Forces are now viewable in database tables
    - Time History Forces are now available in database tables on
      a step by step basis as well as envelopes
    - Other minor bug fixes.

  Changes from V8.3.0 to V8.3.0/2 (08/12/2003)
  -----------------------------------------
    - Reissued with minor changes to working of the license.
    - Wall Design time reduced.
    - Minor changes to Composite Beam Design. More beams should now
      be able to be designed. 
    - Other minor bug fixes.

  Changes from V8.2.7 to V8.3.0 (07/29/2003)
  -----------------------------------------
    - Reissued with minor changes to working of the license.
    - Other minor bug fixes.

  Changes from V8.2.6 to V8.2.7 (06/13/2003)
  -----------------------------------------
    - Reissued as full installation on CD.
    - Examples updated.
    - Verification Manual added.
    - Explicit meshing options added to Section Designer for property calculations.
    - Other minor bug fixes.

  Changes from V8.2.4 to V8.2.6 (05/06/2003)
  -----------------------------------------
    - Explicit menu command to add default design combination added.
    - Program version now determined from available license.
    - Other minor bug fixes.

  Changes from V8.2.3 to V8.2.4 (04/18/2003)
  -----------------------------------------
    - Manuals updated.
    - Other minor bug fixes.

  Changes from V8.1.5 to V8.2.3 (04/08/2003)
  -----------------------------------------
    - The program now supports LPM/6 for CIS/2 Step file import 
      and export.
    - The program now supports Import from Frameworks Plus.
    - The program now supports Export in SDNF format.
    - Other minor bug fixes.

  Changes from V8.1.4 to V8.1.5 (02/03/2003)
  -----------------------------------------
    - A bug in the stress recovery of triangular shaped
      shell elements has been corrected. This did not affect the
      stiffness.
    - The BSShapes.pro file has been modified to correct the
      plastic modulus. It was reporting the section modulus instead.
    - A bug which caused user defined seismic loads from V8.1.1 files
      to be dropped in V8.1.4 has been corrected.
    - Other minor bug fixes.

  Changes from V8.1.1 to V8.1.4 (01/27/2003)
  -----------------------------------------
    - A bug in export to SAFE which caused loads on poly shaped
      AreaObjects not to be exported has been fixed. Affected
      models should be checked or reexported.
    - Section Cuts can now be drawn on the fly and integrated
      forces obtained.
    - The composite beam design has been considerably enhanced
      with more user control provided.   
    - Create Analysis Model has been optimized.     
    - The tolerance for picking up points on edges for Line Constraints
      has been tightened.
    - Chinese steel database has been added (beta)
    - Chinese Wind and Seismic design codes added (beta) 

   Changes from V8.10 to V8.1.1 (10/15/2002)
  -----------------------------------------
    - Reissued on CD with full installation .    
    - A bug that caused some features of DXF Export not to be available has 
      been fixed.     
    - The composite beam design option has been enhanced by providing more 
      user control.

  Changes from V8.09/1 to V8.10 (10/09/2002)
  ---------------------------------------
    - AISC ASD 2001 is now supported for both Steel Frame Design and Composite
      Beam Design.      
    - A bug that caused Joist Design not to proceed in some cases has been fixed.
      This was inadvertantly introduced in V8.09. 
    - A bug that in some rare cases caused a runtime message during creation of
      the analysis mesh has been fixed.

  Changes from V8.09 to V8.09/1 (9/23/2002)
  ---------------------------------------
    - A bug that caused Pier Live Load reduction factors to always default to 1.0 has
      been fixed.
    - Some meshing related warning messages have been added. 
    - Minor display bug fixes.

   Changes from V8.08 to V8.09 (9/16/2002)
  ---------------------------------------
    - A bug that caused the nonlinear static analysis not to run has been fixed. This
      bug was inadvertantly introduced in version 8.08.
    - A bug that did not let Composite design to complete for BS Code has been fixed.
    - Minor bug fixes.
   
  Changes from V8.07 to V8.08 (8/29/2002)
  ---------------------------------------
    - Program reissued on CD.
    - OpenGL viewer enhanced to show deformed shapes and other results views.
    - Design of steel EBF frames enhanced.
    - Minor bug fixes and adjustment of units based defaults.
   
  Changes from V8.06 to V8.07 (8/23/2002)
  ---------------------------------------
    - A bug which may cause some circular concrete columns to be designed as 
      square was corrected. Circular concrete columns designed by the program
      need to be reevaluated. The design forces produced were correct.
    - Line constraints now have flexibility based on connected elements.
    - Ramp/Wall connection is now automatically made at intersecting edges 
      unless line constraints are shut off.
    - The display has been significantly improved. Options for transparency of
      objects added.
    - Distribution of inter-story mass to story levels corrected.
    - Minor corrections made to vertical load distributions from null objects.
    - Minor bug fixes.


  Changes from V8.05 to V8.06 (7/16/2002)
  ---------------------------------------
    - Bug introduced in V8.05 for seismic loads corrected. Mass was incorrect.
    - Vertical load distributions from null objects is now handled.
    - Correction made to application of user defined wind and seismic loads.
    - Minor bug fixes.  


  Changes from V8.00 to V8.05 (6/11/2002)
  ---------------------------------------
    - Significant changes. Several incomplete items were completed.


